RFID card reader

porducts list

CCTV Camera [1]
CCTV Lens [1]
Fax Paper [1]
Fire Alarm Control Panel [4]
Network Hubs [1]
Other Pens [6]
Other Wire Mesh [1]
Pigment [1]
Satellite TV Receiver [1]
Sauce [1]
Smoke Detector [2]
Sports Caps [1]
Telephone Cords [1]
Winter Hats [1]

contact datails

Fengxing Industrial Development Co.,Ltd

10DCaihui Tower, Caihongxindu, Caitian Road, Futian District, Shenzhen

86 0755 22384003 (86 13590316755)

Larger photo of RFID card reader

RFID card reader


company	Fengxing Industrial Development Co.,Ltd
Categories	CCTV DVR
Update	2011-04-06
Original Region	China
prev 1 2 3 4 5 6 7 8 9 10 next

RFID card reader

Product Description

Description:
Wiegand26 transceiver unit is designed for reading the Serial Number of the Mifare I compatible IC cards and is a major component in RFID(Radio Frequency Identification) reader system.
-EM reader introduction:  proximity reader utilizes EM technology to read contactless EM cards Suitable for access control, time and attendance and other card control systems Wiegand output model interfaces with all existing Wiegand protocol access control systems
-MF reader introduction: MF smart card reader utilizes MIFARE technology to read MF contactless smart card. Contactless smart cards are used for stored value or data applications such  as access control, vending, toll roads, airline ticketing,banking cards, city cards, ID cards, university cards,phone cards, park and ride, and prepaid metering
-Power requirements: EM:9-12VDC at 100mA
  MF:7-12VDC at 100mA
  linear regulator is recommended
-Read range:
EM: safety read range for 7cm with standard H4100 card
MF: safety read range for 4cm with Philips Mifare 1 contactless smart card
-Frequency:
-EM: 125kHz standard
-MF: 13.56kHz standard
-Operating temperature: -22 to 150 degrees Fahrenheit （-30 to 65 degrees Celsius）
-Operating humidity: 0% to 95% relative humidity non-condensing
-Audio/visual indication: green, red, yellow LED bar and buzzer
-Response time: less than 0.1 second
-Cable distance:
Wiegand interface100m）
  RS232 interface:   （15m）
  Recommended cable is ALPHA 1295 (22 AWG） 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control
-It can be applied in office/home security, personal identification, access control, anti-forgery and production control systems etc.
-Built-in transceiver antenna;  
-Maximum effective distance up to 75mm;  
-Less than 200ms decoding time;  
-Low power dissipation with single power supply;  
-Wiegand 26bits interface;  
-Support Mifare I compatible IC cards;  
-Built-in bi-color LED and buzzer;  